渣浆泵不能启动该怎么办

故障原因：1)转子卡死或有严重摩擦2)离心泵没有关闭出口阀门，轴流泵没有打开出口阀3)电压太低4)过载安全保护电流调得太低5)平衡轴向力装置失效6)轴承损坏
排除方法：1)检查原因，消除2)离心泵关闭出口阀门启动，轴流泵打开出口阀门启动3)检查原因，排除4)适当调高过载安全保护电流5)检查原因、消除6)更换轴承 渣浆泵

What to do if the slurry pump can not be started

Fault cause: 1) the rotor is stuck or there is serious friction; 2) the outlet valve of centrifugal pump is not closed and the outlet valve of axial flow pump is not opened; 3) the voltage is too low; 4) the overload safety protection current is too low; 5) the balance axial force device fails; 6) the bearing is damaged

Troubleshooting: 1) check the cause and eliminate it; 2) close the outlet valve of centrifugal pump and start it; 3) check the cause and eliminate it; 4) properly raise the overload safety protection current; 5) check the cause and eliminate it; 6) replace the bearing slurry pump