渣浆泵易损件寿命的影响因素
渣浆泵所抽送固液混合物的多种多样，固液混合物磨蚀性程度变化范围很大，泵运行

条件千差万别，这些为研究具有相当精度的确定易损件寿命的方法增加了难度，甚至固体颗粒特性中有一个特性变化，例如硬度系数变化，将导致寿命有很大的变化。例如，当普氏硬度系数从15~17降低到10~12时，由相同材质制作的泵易损件寿命增加0.5~1倍，根据不同运行条件下的统计资料(表3-7- 7)，确定泵零件的寿命。
    同时，零件寿命不是用小时而是用零件完全磨损前泵所抽送固体物料的数量表示。

根据现有运行统计资料，可以计算泵在所抽送固体颗粒和制作零件材质的特性变化时零件的寿命。

渣浆泵零件发生故障前的工作时间(磨蚀性材料的数量，即在第一次故意和强制修理或者更换之前可以通过零件的数量。渣浆泵厂家

Influencing factors of service life of vulnerable parts of slurry pump

There are many kinds of solid-liquid mixtures pumped by slurry pump. The abrasion degree of solid-liquid mixtures varies greatly and the pump operates.

Conditions vary widely. These methods for determining the life of vulnerable parts with considerable accuracy increase the difficulty. Even there is a characteristic change in the characteristics of solid particles, such as the change of hardness coefficient, which will lead to a great change in the life of vulnerable parts. For example, when the Pulser hardness coefficient decreases from 15 to 17 to 10 to 12, the service life of vulnerable parts made of the same material increases by 0.5 to 1 times. According to the statistical data under different operating conditions (Table 3-7-7), the service life of pump parts is determined.

At the same time, the service life of parts is not expressed in hours, but in the quantity of solid materials pumped by the pump before the parts are completely worn out.

According to the existing operation statistics, the service life of the pump parts can be calculated when the solid particles pumped and the material properties of the parts changed.

The working time before the parts of slurry pump fail (the quantity of abrasive materials, that is, the quantity of parts that can be passed before the first intentional and forced repair or replacement.